CY-1ET7040SA-03 MK3 3-Channel Digital Power Amplifier
CY-1ET7040SA-03/03T MK3 3-Channel Digital Power Amplifier
HOT!NEW!
CY-1ET7040SA-03 MK3 is an extremely powerful three channel digital amplifier in our regular series, capable of driving high performance left, center, and right channel loudspeakers with demanding power requirements in a surrounding system. Powered by 3 pcs of Purifi Audio's latest generation 1ET7040SA modules, this amplifier delivers extraordinary musical performance with its superb detail, resolution and soundstage, as well as ultra-low noise distortion and extremely fast transient response. To get the most out of the 1ET7040SA's capabilities, our custom-designed BB-SPL7879C-2F buffer board features the cutting-edge Sparkos Labs SS78XX and SS79XX discrete voltage regulators, eliminating any unnecessary noise and interference before the power reaches the Op amps of this buffer board, thus supplying extremely stable power to the module. Combined with a choice of Op Amps such as Sparkos Labs or Sonic Imagery operating in full Class-A, the sound is richer, denser and more delicate while adding warmth and depth. Benefiting from the continuous innovation of digital amplifier technologies over the years, our latest generation of amplifiers not only retains the unique sound characteristics, high efficiency power and lightweight size of previous digital amplifiers, but also provide sound quality comparable to traditional amplifiers on the market that are several times more expensive, whether they are Class-A, Class-AB or even other Class-D types.
To acheive the best possible sound from the CY-1ET7040SA-03 MK3, the quality of the power supply to the buffer board is one of the key factor. After continuous research and testing on the power supply by our R&D team, the following three requirements must be met in order to bring its performance to the next level: first, the power must be stable; second, the power must be sufficient; third, the power must be pure. The first requirement has been fully accomplished by adapting the most powerful discrete voltage regulator, while the remaining two requirements are fulfilled by using our built-in LPS-AUX03B-2H auxiliary linear power supply module. With three sets of internal power supplies, it independently powers the buffer board of each channel to secure that the Op amps of each channel obtain the most sufficient current supply. To ensure that the Op amps draw the purest and cleanest power in the entire power chain, each set of power supplies uses an audiophile-quality linear power supply to power the buffer board, which perfectly complements its discrete voltage regulators, bringing its power quality closer to perfection. In addition, a variety of efficient power management functions are also implemented, including the ability to control the power state of the main power supply and support for 12V trigger control switch functions. The main power for this amplifier in the Regular Series is supplied by a Hypex SMPS3KA400 switching power supply, which fully utilizes the potential of 1ET7040SA.
Introducing its triple-power supply version, CY-1ET7040SA-03T MK3, to satisfy customers who cannot compromise on any music details. This model is a true triple-mono system to ensure that the power supply of each channel is independent and does not interfere with each other, so that when listening to songs with large dynamic ranges such as jazz or classical music, each channel has continuous of power supply. In the standard configuration of our regular series, each buffer board of this amplifier comes with a pair of studio-grade Sparkos Labs SS2590 full-discrete Class-A audiophile Op amps, and all connectors are equipped with our carefully selected high quality components. Benefiting from internal structure of the modular configuration, Op amps can be replaced with equivalent Sonic Imagery 990Enh or the cutting-edge Weiss OP2-BP upon customers request. Not just limited to Op amps, customers can also choose to upgrade other components before shipment, including power IEC inlet, XLR Socket and speaker post as well as Neotech 7N UP-OCC copper internal cable and other accessories. In addition, the existing single-power system can be upgraded to a three-power system in the future by replacing the existing power supply with 3 pcs of SMPS1200A400 switching power supplies. Lastly, all of our amplifiers also employ a new symmetrical internal and rear panel layout to keep the internal wiring as short as possible.
Sound Channel : | Three Channel System |
Module: | Purifi Audio 1ET7040SA (3 pcs) |
Power Module: | CY-1ET7040SA-03 MK3: Hypex SMPS3KA400 (1 pc); Three-channel system CY-1ET7040SA-03T MK3: Hypex SMPS1200A400 (3 pcs); True triple-mono system |
Auxiliary power module: | LPS-AUX03B-2H (1 pc); provides independent linear power supply for each channel's op amp and power management functions |
Buffer Board: | BB-SPL7879C-2F (3 pcs); Each employing Sparkos Labs SS78XX and SS79XX discrete regulators |
Operational Amplifier: | Sparkos Labs SS2590 (3 pairs); Optional Sonic Imagery 990Enh (3 pairs) or Weiss OP2-BP (3 pairs) |
Power : | 250W 8 ohm |
500W 4 ohm | |
950W 2 ohm | |
SNR: | 129dB |
Frequency Response: | 0-60KHz +0/-3dB |
Low Distortion: | THN+D - 0.00035% 200W 4Ω 1KHz |
Input Impedance: | 47K |
Gain: | 20/27dB (Manual Switch) |
Current Output: | ~40A |
Efficiency: | > 94% |
Input: | RCA unbalanced / XLR balanced (Manual Switch) |
Switch Button: | Crystal/Metal Casing (w/ LED light; On: Blue/Off: Red) |
Case: | All-aluminum (Silver or Black); Upgradable to extra thick chassis |
Dimension: | 430mm (W) X 428mm (D) X 90mm (H) 430mm (W) X 454mm (D: including posts) X 103mm (H: including legs) |
Weight: | CY-1ET7040SA-03 MK3: ~13kg (net weight); ~15kg (gross weight) CY-1ET7040SA-03T MK3: ~14kg (net weight); ~16kg (gross weight) |
Warranty: | 2 years |
Configuration Options
-
- CY-1ET7040SA-03 MK3 (3-Channel System)
- CY-1ET7040SA-03T MK3 (True Triple-Mono System) +$350
-
- SS2590
- 990Enh +$248
-
- 3 Sets
-
- Support
-
- High Quality Gold Plated
- Red Copper Gold Plated +$40
- Red Copper Rhodium Plated +$74
- WBT 0703CU +$111
-
- Neutrik Gold Plated XLR + RCA
- Furutech Rhodium Plated + RCA +$101
-
- Furutech Gold Plated
- Furutech Rhodium Plated +$6
-
- Pure Copper Silver Plated
- Neotech UP-OCC +$53
-
- Standard
- Extra Thick +$15
-
- 110V
- 220V
- 230V
-
- US 3-Pin
- National 3-Pin
- UK 3-Pin
- EU Type
-
- Silver
- Black